|Product name||portable cold and hot blackhead remover face cleaner|
|Charging voltage/current||DC 5V 1A|
|Battery specification||polymer lithium battery, 3.7V, 750mAh|
|Freezing temperature||decreasing amplitude≥15℃|
Electric blackhead remover Using steps
1. Open the sponge cover, put dry filter sponge into filter cup, install the needed suction head.
2. Long press “Switch/ levels key” for 3 seconds, machine powers on, display screen is on and enter into stand by mode.
3. Short press “Cold/hot toggle key” and enter into warm mode. Heating probe puts on needed suction area. Help to open pore.
4. Short press” Switch/ levels key” blackhead suction function. Short press one time, level increases one level, total is 3 levels
. When in the third level, short press then blackhead suction function close.
5. Blackhead suction adjust to suitable level, slowly move the head on treatment area. Do not operate same area for long
.(before the suction head leave skin, please open the head from side and release the vacuum air, then can be easy to take
down and avoid skin being red of pulling)
6. Close blackhead suction function, short press”Cold/hot toggle key”, device enter into freezing mode. Cold head put on
treated area and apply cold compress, help to shrink pore. Blackhead machine with derived lotion or pore shirking essence
will have much better effect.
The device will be heating if use cold mode for long time, so do not continue to use cold mode. After using cold
mode, please power off. The interval time is over 30 minutes before using again.
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.