{"id":90217,"date":"2026-09-29T17:04:00","date_gmt":"2026-09-29T09:04:00","guid":{"rendered":"https:\/\/www.konmison.com\/?p=90217"},"modified":"2026-09-29T17:04:02","modified_gmt":"2026-09-29T09:04:02","slug":"led-light-therapy-machine-buyer-guide","status":"publish","type":"post","link":"https:\/\/www.konmison.com\/es\/led-light-therapy-machine-buyer-guide\/","title":{"rendered":"LED Light Therapy Machine Buyer&#8217;s Guide: Wavelengths, Power and Formats"},"content":{"rendered":"<p>Two LED machines can carry the same &#8220;phototherapy&#8221; label and still serve completely different businesses. One is a 105-bead portable panel that moves between rooms in a flight case; the other is a 1,830-bead vertical unit that floods the face in a single pass. Both are legitimately called LED light therapy machines \u2014 and buying the wrong format for your room is an expensive mistake, because the format decides the treatment menu before anything else does.<\/p>\n\n\n\n<p>LED phototherapy has become one of the most requested add-on services in facial clinics, and it is also one of the easiest services to run: no consumables, no operator-dependent technique, and a treatment that largely runs itself once the client is positioned. That combination is exactly why the buying decision deserves care \u2014 the machine you choose sets your session time, your pricing structure and how many clients you can push through a day.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why LED Systems Look Similar but Perform Differently<\/h2>\n\n\n\n<p>LED phototherapy machines are harder to compare than most aesthetic equipment, for three reasons.<\/p>\n\n\n\n<p>First, <strong>the headline specification is usually the least informative one<\/strong>. Marketing leads with color count \u2014 &#8220;7-color LED&#8221; sounds better than &#8220;4-color LED&#8221; \u2014 but the colors only matter if your menu needs them. A clinic running acne-care and recovery protocols can cover both with red and blue alone; seven colors add menu breadth, not treatment depth.<\/p>\n\n\n\n<p>Second, <strong>the specification that actually drives results is rarely published<\/strong>. Irradiance \u2014 the light power delivered to the skin, measured in mW\/cm\u00b2 \u2014 varies enormously between machines at the same price point, and most listings do not state it at all. What you can check instead are the numbers that feed into it: power per LED bead, total system power, and irradiation area.<\/p>\n\n\n\n<p>Third, <strong>format is destiny<\/strong>. A mask, a desktop dome, a standing 360\u00b0 unit and a full-body panel are four different businesses wearing the same technology name. The next section breaks the decision into the four specifications that matter.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The Specs That Decide Your Treatment Menu<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Wavelengths and What Each One Does<\/h3>\n\n\n\n<p>Wavelength \u2014 measured in nanometers (nm) \u2014 determines how deep the light travels and which protocols it supports. On our own platform, the five-color spectrum covers the professional range:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Blue, ~470 nm<\/strong> \u2014 the standard choice in acne-care protocols; short wavelength, stays near the surface.<\/li>\n\n\n\n<li><strong>Green, ~535 nm<\/strong> \u2014 used in calming and tone-balancing work.<\/li>\n\n\n\n<li><strong>Yellow, ~590 nm<\/strong> \u2014 associated with brightening and soothing routines.<\/li>\n\n\n\n<li><strong>Red, ~650\u2013660 nm<\/strong> \u2014 the workhorse of rejuvenation and recovery protocols; penetrates further than the visible short wavelengths.<\/li>\n\n\n\n<li><strong>Near-infrared (NIR), ~850 nm<\/strong> \u2014 the deepest-reaching band, used in recovery-focused and full-body care programs.<\/li>\n<\/ul>\n\n\n\n<p>Two practical rules follow. If your menu centers on breakout-prone skin, blue plus red covers the core protocol on almost any system. If you want recovery and full-body programs on the menu, confirm the machine includes a true NIR band \u2014 some &#8220;8-color&#8221; machines list infrared among their colors, others substitute pink or cyan, which are visible-light variants rather than deeper-penetrating bands.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1200\" height=\"675\" src=\"https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl080-five-wavelength-spectrum-1200x675-1.jpg\" alt=\"Five LED wavelengths on a professional PDT machine: 850nm NIR, 650nm red, 470nm blue, 535nm green, 590nm yellow\" class=\"wp-image-90221\" srcset=\"https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl080-five-wavelength-spectrum-1200x675-1.jpg 1200w, https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl080-five-wavelength-spectrum-1200x675-1-18x10.jpg 18w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">LED Count and Power Density<\/h3>\n\n\n\n<p>Bead count is the specification buyers quote most and understand least. Across our current range, LED counts run from 105 beads on a portable full-body panel to 1,830 beads on a vertical PDT unit \u2014 but the number only means something next to two other values: <strong>power per bead<\/strong> y <strong>irradiation area<\/strong>.<\/p>\n\n\n\n<p>Power per bead is the cleaner quality signal. Our portable 5-color unit, for example, drives each of its 540 beads at 200 mW using 5\u00d75 mm high-power integrated chips, at 300 W total system power \u2014 a configuration built for professional session times rather than long exposures. A unit running the same bead count at a fraction of that per-bead power is a different class of machine, however similar the brochures look.<\/p>\n\n\n\n<p>Irradiation area decides throughput. A treatment head covering <strong>1,200 cm\u00b2 or more<\/strong> can address the full face and neck in one position; a smaller window means repositioning the client and stretching session times. Between bead count, per-bead power and coverage area, you can reconstruct most of what irradiance figures would tell you \u2014 which is why our comparison table lists all three.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Format: Mask, Desktop Dome, Standing Unit or Full-Body Panel<\/h3>\n\n\n\n<p>Four formats dominate the professional market, and each implies a different service model:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Silicone masks<\/strong> (wired or rechargeable) wrap the face \u2014 and on extended models, the neck \u2014 in flexible panels. They free the operator completely and suit clinics that run LED as an add-on during other treatments.<\/li>\n\n\n\n<li><strong>Desktop domes<\/strong> sit on a trolley or counter and treat a client who is lying down. They are the classic facial-room unit: fixed position, simple operation, modest footprint.<\/li>\n\n\n\n<li><strong>Standing 360\u00b0 units<\/strong> add a rotating or adjustable lamp head above a bed \u2014 the operator positions the dome once and the whole face plus neck sits inside the light field. Larger lamp heads (our standing models carry 1,098 beads, and the vertical flagship reaches 1,830) and features like AI voice control and cycle-light programs sit at the premium end here.<\/li>\n\n\n\n<li><strong>Portable full-body panels<\/strong> trade some footprint flexibility for coverage \u2014 a flat or slightly curved array that treats larger body areas, typically in a flight-case format for clinics that move equipment between rooms.<\/li>\n<\/ul>\n\n\n\n<p>Match the format to how the service will actually run. If LED is a fifteen-minute add-on while the esthetician works elsewhere, a mask or a set-and-forget dome wins. If LED is a standalone billed treatment with consultation time around it, the larger standing units earn their footprint.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Session Time and Room Efficiency<\/h3>\n\n\n\n<p>Published session windows on professional systems run from <strong>10\u201330 minutes<\/strong> on rechargeable masks to <strong>1\u201360 minutes<\/strong> of adjustable treatment time on larger units. What matters commercially is not the maximum but the default: a protocol that finishes in 15\u201320 minutes lets a single room turn over four to six LED sessions per hour in combination with other services.<\/p>\n\n\n\n<p>This is also where multifunction platforms enter the picture \u2014 cabinets that pair an LED module with a second billable technology give one machine two line items on the menu. The trade-off is the same as with any combination system: more capability, more moving parts, and a bigger investment than a dedicated LED unit.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">LED PDT Machine Comparison<\/h2>\n\n\n\n<p>The table below compares six current systems from our range, from a 105-bead portable panel to a 1,830-bead vertical unit. All figures come from the published product specifications.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" width=\"1200\" height=\"675\" src=\"https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl080-pdt-machine-white-background-1200x675-1.jpg\" alt=\"Professional LED PDT machine with articulated dome and touchscreen control\" class=\"wp-image-90222\" srcset=\"https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl080-pdt-machine-white-background-1200x675-1.jpg 1200w, https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl080-pdt-machine-white-background-1200x675-1-18x10.jpg 18w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Modelo<\/th><th>Format<\/th><th>LED beads<\/th><th>Light colors<\/th><th>Potencia<\/th><th>Standout specification<\/th><\/tr><\/thead><tbody><tr><td>GL078<\/td><td>Standing 360\u00b0 dome<\/td><td>765<\/td><td>8 (incl. infrared)<\/td><td>-<\/td><td>Touchscreen; monochrome and auto-loop modes; 360\u00b0 adjustable support arm<\/td><\/tr><tr><td>GL049<\/td><td>Vertical PDT unit, 180\u00b0 adjustable head<\/td><td>1,830<\/td><td>4 (red, blue, green + mixed 420\u2013830 nm)<\/td><td>-<\/td><td>10 intensity levels; medical-grade beads<\/td><\/tr><tr><td>GL080<\/td><td>Portable dome, flight case<\/td><td>540<\/td><td>5 (NIR, rojo, azul, verde, amarillo)<\/td><td>300 W<\/td><td>200 mW per bead; irradiation area \u22651,200 cm\u00b2; 1\u201360 min<\/td><\/tr><tr><td>GL075<\/td><td>Standing 360\u00b0 dome<\/td><td>1,098<\/td><td>7<\/td><td>-<\/td><td>AI voice control; 10 energy levels<\/td><\/tr><tr><td>GL076<\/td><td>Standing 360\u00b0 dome<\/td><td>1,098<\/td><td>7<\/td><td>-<\/td><td>Manual single-light and cycle modes; touchscreen<\/td><\/tr><tr><td>GL073<\/td><td>Portable full-body panel<\/td><td>105<\/td><td>Red 650\u2013660 nm + infrared 850\u2013860 nm<\/td><td>180 W<\/td><td>3 modes (red \/ infrared \/ combined)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Reading the table by row tells the market&#8217;s structure. The two seven-color standing domes (GL075 \/ GL076) compete on control features rather than raw output \u2014 same bead count, different interface. GL078 widens the standing family&#8217;s spectrum to eight colors with infrared on top, while GL049 leads the range on sheer output: 1,830 medical-grade beads, ten intensity levels and a mixed-light band that spans 420\u2013830 nm. The portable pair (GL080 \/ GL073) splits between maximum irradiance and maximum simplicity.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Matching the System to Your Room and Menu<\/h2>\n\n\n\n<p><strong>Adding phototherapy to an existing facial menu.<\/strong> The priority is a unit that treats face and neck in one position without occupying the esthetician. A <a href=\"https:\/\/www.konmison.com\/es\/articulo-del-producto\/ai-voice-control-360-rotating-7-color-led-lights-skin-beauty-machine\/\">standing 360\u00b0 LED machine with 1,098 beads and AI voice control<\/a> fits this brief \u2014 position the dome, start the program, work on something else. Its sibling <a href=\"https:\/\/www.konmison.com\/es\/articulo-del-producto\/360-rotating-7-color-led-lights-skin-beauty-machine\/\">with a touchscreen and manual-plus-cycle modes<\/a> covers the same menu at a simpler control scheme.<\/p>\n\n\n\n<p><strong>Running LED as a primary billed treatment, or serving multiple rooms.<\/strong> When phototherapy is the service rather than the add-on, irradiance and coverage decide client throughput. Our <a href=\"https:\/\/www.konmison.com\/es\/articulo-del-producto\/portable-5-color-infrared-therapy-led-pdt-beauty-machine\/\">portable 5-color NIR-PDT unit<\/a> \u2014 540 beads at 200 mW, \u22651,200 cm\u00b2 coverage, flight-case packing \u2014 is built for exactly this: clinic-grade output that still moves between rooms.<\/p>\n\n\n\n<p><strong>Equipping a first LED service or upgrading a dated dome.<\/strong> En <a href=\"https:\/\/www.konmison.com\/es\/articulo-del-producto\/360-degree-rotate-8-color-led-lights-skin-beauty-machine\/\">360\u00b0 rotating 8-color unit with 765 beads<\/a> covers the widest color menu in the range from a single touchscreen \u2014 run one color per program or set the auto-loop \u2014 and the adjustable support arm lets the operator position the lamp once and move on.<\/p>\n\n\n\n<p><strong>Running phototherapy at treatment-room scale.<\/strong> When LED is a core service with back-to-back bookings, the <a href=\"https:\/\/www.konmison.com\/es\/articulo-del-producto\/china-pdt-led-terapia-de-luz-facial-de-la-maquina\/\">vertical PDT unit with 1,830 medical-grade beads<\/a> supplies the headroom: ten intensity levels, a 180\u00b0 adjustable head and a mixed-light band that supports anti-inflammatory and recovery programs on the same menu.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" width=\"1200\" height=\"675\" src=\"https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl049-pdt-clinical-session-1200x675-2.jpg\" alt=\"Client under a blue-light LED PDT dome during a professional treatment session\" class=\"wp-image-90242\" srcset=\"https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl049-pdt-clinical-session-1200x675-2.jpg 1200w, https:\/\/www.konmison.com\/wp-content\/uploads\/2026\/09\/gl049-pdt-clinical-session-1200x675-2-18x10.jpg 18w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Standalone Unit or Multifunction Machine?<\/h2>\n\n\n\n<p>A third path sits between the dedicated LED unit and the mask: multifunction platforms that include an LED mask among many handles. These make sense when the room&#8217;s core business is already the other technology \u2014 a hydrodermabrasion cabinet with an LED mask attached extends the treatment without a second purchase. Our <a href=\"https:\/\/www.konmison.com\/es\/maquina-hidrafacial-2\/\">guide to choosing a hydrodermabrasion machine<\/a> covers that category in depth.<\/p>\n\n\n\n<p>The honest comparison: a dedicated LED unit wins on irradiance per dollar and session simplicity, while a multifunction machine wins when floor space, not light output, is the binding constraint. Clinics that promise phototherapy as a headline service should buy a machine whose main job is phototherapy.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The Pre-Purchase Checklist<\/h2>\n\n\n\n<p>Before committing to any LED system, confirm these seven points:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Wavelengths in writing.<\/strong> Ask for the nm values per color, not just the color names \u2014 650 nm and 660 nm red are both &#8220;red,&#8221; but they are not the same protocol.<\/li>\n\n\n\n<li><strong>NIR authenticity.<\/strong> If near-infrared matters for your menu, verify the band is a true 830\u2013860 nm emitter rather than a visible-light stand-in.<\/li>\n\n\n\n<li><strong>Power per bead and total system power.<\/strong> These two numbers predict irradiance better than bead count alone.<\/li>\n\n\n\n<li><strong>Irradiation area.<\/strong> Full-face-plus-neck in one position, or repositioning required? The answer changes your session math.<\/li>\n\n\n\n<li><strong>Timer and program control.<\/strong> Look for adjustable treatment time, preset programs per color, and cycle modes if operators will run treatments unattended.<\/li>\n\n\n\n<li><strong>Power environment.<\/strong> Confirm 110 V \/ 220 V compatibility for your market before you sign.<\/li>\n\n\n\n<li><strong>Compliance documents and OEM options.<\/strong> Request the certificates that apply in your market, and confirm logo, language and housing customization early if you sell under your own brand.<\/li>\n<\/ol>\n\n\n\n<h2 class=\"wp-block-heading\">Budget Planning<\/h2>\n\n\n\n<p>LED phototherapy spans the widest price range of any category in this guide series, because the formats are genuinely different products. A portable panel, a single-arm standing dome and a 1,830-bead vertical unit can differ in price by an order of magnitude \u2014 comparing them as one category is the fastest way to a wrong purchase.<\/p>\n\n\n\n<p>Budget by service model instead. If LED is an add-on, the machine&#8217;s cost competes with labor saved; a simple dome pays back through added ticket value on existing appointments. If LED is a primary treatment, model revenue per session against the irradiance you are buying \u2014 a 300 W system that finishes protocols in a fraction of the time of a low-power unit can out-earn a cheaper machine in the same room. Freight matters too: standing domes and flight-case units ship at roughly 18\u201332 kg, which changes landed cost on small trial orders.<\/p>\n\n\n\n<p>For a current quotation matched to your market and configuration, <a href=\"https:\/\/www.konmison.com\/es\/pongase-en-contacto-con\/\">contact our team<\/a> with your intended menu and room size.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ about LED Light Therapy Machines<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">How many colors does a professional LED machine need?<\/h3>\n\n\n\n<p>Fewer than marketing suggests. Red and blue cover the core acne-care and recovery protocols; green and yellow add calming and brightening routines; NIR extends the menu into deeper-penetrating programs. Seven or eight colors broaden the menu, but a 4-color machine with the right wavelengths beats an 8-color machine with the wrong ones.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Is a higher LED bead count always better?<\/h3>\n\n\n\n<p>No. Bead count matters alongside power per bead and irradiation area \u2014 540 beads driven at 200 mW over a \u22651,200 cm\u00b2 field outperforms a larger count at low power for professional session times. Read the three numbers together.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What is the difference between red light and near-infrared?<\/h3>\n\n\n\n<p>Red light (roughly 650\u2013660 nm) works in the upper layers of the skin and anchors most rejuvenation and recovery protocols. Near-infrared (roughly 830\u2013860 nm) penetrates deeper and is used in recovery-focused and full-body programs. Machines offering both \u2014 often with a combined mode \u2014 cover the widest menu.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can LED machines run treatments without an operator present?<\/h3>\n\n\n\n<p>Yes, and this is one of the category&#8217;s commercial advantages. Standing domes and vertical units run preset timers and loop programs, so a client can be positioned and left to complete the session while the esthetician works elsewhere. Confirm the unit has program memory and a clear timer display if unattended operation is your plan.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">How long is a typical LED treatment session?<\/h3>\n\n\n\n<p>Professional protocols commonly run 10\u201330 minutes depending on the machine class and the program. Adjustable systems allow 1\u201360 minute settings, which gives operators room to combine LED with other services in a single appointment.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Does LED phototherapy require consumables or gels?<\/h3>\n\n\n\n<p>No. LED phototherapy is a dry, contact-free light treatment \u2014 no gels, no disposables, and no per-session consumable cost. That is a core part of its margin story compared with technologies that require gels, tips or cartridges; eye protection for the client is the only recurring item to budget.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusi\u00f3n<\/h2>\n\n\n\n<p>LED phototherapy is one of the simplest technologies to operate and one of the easiest to buy wrong. The label on the box \u2014 LED, PDT, phototherapy, light therapy \u2014 tells you nothing about the three specifications that decide your menu: wavelengths in real nanometers, power per bead alongside irradiation area, and a format that matches how the service will actually run in your room.<\/p>\n\n\n\n<p>Start from the service model, not the brochure. Add-on menus suit simple domes; primary phototherapy treatments justify the irradiance of a professional NIR-PDT system; a first LED service runs happily on a 765-bead 8-color unit. Match the machine to the menu and the rest of the decision follows.<\/p>\n\n\n\n<script type=\"application\/ld+json\">{\n    \"@context\": \"https:\\\/\\\/schema.org\",\n    \"@graph\": [\n        {\n            \"@type\": \"Organization\",\n            \"@id\": \"https:\\\/\\\/www.konmison.com\\\/#organization\",\n            \"name\": \"Konmison\",\n            \"alternateName\": \"Guangzhou Konmison Technology Co., Ltd.\",\n            \"url\": \"https:\\\/\\\/www.konmison.com\",\n            \"logo\": \"https:\\\/\\\/www.konmison.com\\\/wp-content\\\/uploads\\\/konmison-logo.png\",\n            \"contactPoint\": {\n                \"@type\": \"ContactPoint\",\n                \"contactType\": \"sales\",\n                \"email\": \"export01@konmison.net\",\n                \"telephone\": \"+86-13247551793\",\n                \"availableLanguage\": [\n                    \"English\",\n                    \"Chinese\"\n                ]\n            }\n        },\n        {\n            \"@type\": \"Article\",\n            \"@id\": \"https:\\\/\\\/www.konmison.com\\\/led-light-therapy-machine-buyer-guide\\\/#article\",\n            \"headline\": \"LED Light Therapy Machine Buyer's Guide: Wavelengths, Power and Formats\",\n            \"description\": \"Compare professional LED PDT machines by wavelength, LED count, irradiation area and format. A clinic-focused buyer's guide to phototherapy systems.\",\n            \"inLanguage\": \"en\",\n            \"mainEntityOfPage\": {\n                \"@type\": \"WebPage\",\n                \"@id\": \"https:\\\/\\\/www.konmison.com\\\/led-light-therapy-machine-buyer-guide\\\/\"\n            },\n            \"publisher\": {\n                \"@id\": \"https:\\\/\\\/www.konmison.com\\\/#organization\"\n            },\n            \"about\": [\n                {\n                    \"@type\": \"Thing\",\n                    \"name\": \"LED light therapy machine for clinics\"\n                },\n                {\n                    \"@type\": \"Thing\",\n                    \"name\": \"LED PDT phototherapy system\"\n                },\n                {\n                    \"@type\": \"Thing\",\n                    \"name\": \"LED wavelength 650nm 470nm 850nm NIR\"\n                },\n                {\n                    \"@type\": \"Thing\",\n                    \"name\": \"Professional LED machine buying guide\"\n                }\n            ],\n            \"articleSection\": \"Buyer Guide\"\n        },\n        {\n            \"@type\": \"FAQPage\",\n            \"@id\": \"https:\\\/\\\/www.konmison.com\\\/led-light-therapy-machine-buyer-guide\\\/#faq\",\n            \"mainEntity\": [\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How many colors does a professional LED machine need?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Fewer than marketing suggests. Red and blue cover the core acne-care and recovery protocols; green and yellow add calming and brightening routines; NIR extends the menu into deeper-penetrating programs. Seven or eight colors broaden the menu, but a 4-color machine with the right wavelengths beats an 8-color machine with the wrong ones.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Is a higher LED bead count always better?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"No. Bead count matters alongside power per bead and irradiation area \\u2014 540 beads driven at 200 mW over a \\u22651,200 cm\\u00b2 field outperforms a larger count at low power for professional session times. Read the three numbers together.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What is the difference between red light and near-infrared?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Red light (roughly 650\\u2013660 nm) works in the upper layers of the skin and anchors most rejuvenation and recovery protocols. Near-infrared (roughly 830\\u2013860 nm) penetrates deeper and is used in recovery-focused and full-body programs. Machines offering both \\u2014 often with a combined mode \\u2014 cover the widest menu.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Can LED machines run treatments without an operator present?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Yes, and this is one of the category's commercial advantages. Standing domes and vertical units run preset timers and loop programs, so a client can be positioned and left to complete the session while the esthetician works elsewhere. Confirm the unit has program memory and a clear timer display if unattended operation is your plan.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How long is a typical LED treatment session?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Professional protocols commonly run 10\\u201330 minutes depending on the machine class and the program. Adjustable systems allow 1\\u201360 minute settings, which gives operators room to combine LED with other services in a single appointment.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Does LED phototherapy require consumables or gels?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"No. LED phototherapy is a dry, contact-free light treatment \\u2014 no gels, no disposables, and no per-session consumable cost. That is a core part of its margin story compared with technologies that require gels, tips or cartridges; eye protection for the client is the only recurring item to budget.\"\n                    }\n                }\n            ]\n        }\n    ]\n}<\/script>\n\n\n\n<p><\/p>","protected":false},"excerpt":{"rendered":"<p>Two LED machines can carry the same &#8220;phototherapy&#8221; label and still serve completely different businesses. One is a 105-bead portable panel that moves between rooms in a flight case; the other is a 1,830-bead vertical unit that floods the face in a single pass. Both are legitimately called LED light therapy machines \u2014 and buying [&hellip;]<\/p>","protected":false},"author":3,"featured_media":90243,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"LED PDT Machine Buyer's Guide: Wavelength, Power, Format","_seopress_titles_desc":"Compare professional LED PDT machines by wavelength, LED count, irradiation area and format. A clinic-focused buyer's guide to phototherapy systems.","_seopress_robots_index":"","footnotes":""},"categories":[56],"tags":[],"class_list":["post-90217","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blogs"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/posts\/90217","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/comments?post=90217"}],"version-history":[{"count":1,"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/posts\/90217\/revisions"}],"predecessor-version":[{"id":90244,"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/posts\/90217\/revisions\/90244"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/media\/90243"}],"wp:attachment":[{"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/media?parent=90217"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/categories?post=90217"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.konmison.com\/es\/wp-json\/wp\/v2\/tags?post=90217"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}