IPL hair removal is one of the most revolutionary procedures in the sphere of beauty and personal care. It is intended to gradually slow down hair growth so that the process of depilation and the achievement of smooth skin becomes much easier at home. In this guide, you will learn how to use an IPL hair removal device properly and get the best results for permanent hair removal.
What is IPL Hair Removal and How Does It Work?
IPL hair removal works by emitting intense pulses of light that are absorbed by the hair follicle beneath the skin. The melanin (pigment) in the hair takes up light energy which is converted to heat and causes harm to the follicle and hampers or stops further hair growth. IPL is different from laser hair removal because it employs a wide spectrum of light, and it is preferred for home use.
This method is most effective for people with light to medium skin and dark hair, since skin and hair contrast helps the light to focus on the pigment. But there are some IPL devices that are developed to work on dark skin or red hair with the help of new technology that can change the energy level according to the skin type.
Choosing the Right IPL Hair Removal Device for Your Skin Tone
It is important to note that the skin tone and hair color should be taken into consideration when choosing the IPL hair removal device. Some devices have sensors that help the device determine the best settings for your skin type. Some are fixed while others can be adjusted to the level of energy that you want to set. Some of the best brands in the market include Konmison and other manufacturers who have specific devices for different skin types and areas such as the bikini area, upper lip, and underarms.
First-time users should consider a device that comes with easy-to-follow guidelines on how to use the IPL hair removal device at home. Some of the things that you should consider include skin tone sensors, protective eyewear, and guides that are easy to read. It is crucial to know how your device works with your skin type and hair color to get the best outcome and prevent problems such as redness or irritation.
Pre-Treatment Preparation: How to Get Ready for IPL Hair Removal
It is crucial to prepare for IPL treatment to avoid complications and get the best results from the procedure. If you follow these key steps, you will be able to maximize the chances of your skin’s positive reaction and the effectiveness of the treatment.
Shave the Area
This is because the hair has to be shaved to allow the light to penetrate the hair follicle without being hindered by hair on the surface of the skin. This is because long hairs may hinder the penetration of the light thus making the treatment less effective. Do not wax, pluck or epilate as these methods pull out the hair right from the root and hence reduce the effectiveness of the IPL.
Clean the Skin
Make sure that the treatment area is free from skin products like oil, lotion, and makeup. Remnants of these products can hinder light from the IPL device, thus affecting the effectiveness of the treatment. Before the session, clean the skin with mild soap and ensure that the skin is dry.
Avoid Sun Exposure
It is recommended that you do not sunbathe or tan at least two weeks prior to the IPL treatment. Tanning can make the IPL device target the skin rather than the hair and this may result in burns or pigmentation. To avoid skin damage, either use sunscreen or avoid going out in the sun.
Test a Small Area
Always do a skin patch test on a small area of your skin before applying the treatment on large areas if you are using it for the first time. This will enable you to check the reaction of your skin to the IPL treatment and determine if there are side effects such as irritation or redness when applied on large areas such as the legs or bikini area.
The following are some of the pre-treatment measures that you should take in order to enhance the safety of the IPL hair removal process: Prevention is not only effective in minimizing the side effects but also in enhancing the effectiveness of the treatment.
Step-by-Step Guide: How to Use an IPL Hair Removal Device Safely
After you have properly prepared your skin, you can now begin your IPL hair removal process. By following these detailed steps, you will be able to get the best and safest results.
Choose the Right Mood
Many IPL devices have settings for energy that are set according to the skin tone and hair color of the user. It is recommended to read the manufacturer’s instructions to find out the appropriate energy level for your skin. For delicate skin or fine hair, the energy level may be set at a lower level, while for dark or coarse hair, the energy level may be set at a higher level. If you are unsure start at a lower setting and gradually turn it up if needed while observing the skin’s reaction.
Position the Device Correctly
It is also important to ensure that the IPL device is in contact with the skin and that it is flat against the treatment area. Some of the devices have a sensor that will only enable the light to come on when the device is properly positioned. If the device is not placed correctly, the light will not turn on, thus avoiding illumination of other areas that are not of interest. This feature increases safety, especially when treating curved or hard to reach areas.
Start from the Bottom
This is why it is advisable to start your treatment on areas that are less sensitive and larger such as the legs. After you have familiarized yourself with the device, you can then proceed to more sensitive areas such as the underarms, bikini area or the face especially the upper lip area. It is advisable to take time and move from the large areas to the sensitive areas slowly so that you can have control over your hand and avoid causing any discomfort or irritation.
Move in Sections
To achieve this, it is advisable to divide the treatment area into sections to guarantee that all the area is covered to an equal extent. For instance, when exercising the legs, you should exercise the lower leg before exercising the upper leg. It also prevents one from over-irritating the same area, which may lead to burns or skin rashes. This way of working in sections makes it possible to ensure that each part of the material gets an equal amount of light, thus making the treatment efficient.
Wear Protective Eyewear
Some IPL devices are equipped with protective goggles that are intended to protect your eyes from the bright, intense light flashes. These should be worn when treating areas close to the face or any area where the light may be reflected on the eyes. In treating other parts of the body, it is advisable to wear eyewear as a measure of precaution in case of accidental splashing.
If you follow these steps properly, you will be able to have safe, effective and hassle-free IPL hair removal. Patience and diligence will enable you to achieve the best results in the long run,slow down hair growth while avoiding skin reactions or other side effects.
Post-Treatment Care: Essential Tips for Smooth and Safe Results
After completing your IPL treatment, it’s crucial to take care of your skin to avoid irritation and achieve the best outcomes. Here are some essential post-care tips:
It is crucial to follow the right aftercare procedures after the IPL hair removal session to ensure that your skin is healthy and heals well. First, apply a mild, non-irritating lotion to the treated area to reduce any possible inflammation. As it was the case before treatment, do not expose your skin to the sun for at least two weeks as it is sensitive and can easily develop hyperpigmentation after the treatment. Drinking water also assists the skin to regain its smoothness after washing it and this is why you should ensure that you take a lot of water. Also, it is recommended not to use any scrubs, chemical peels, or other aggressive treatments right after the IPL session to avoid skin sensitivity and give the skin enough time to recover.
Following these post-care steps will help reduce any redness and ensure your skin stays smooth as your body hair gradually reduces.
Common Mistakes to Avoid When Using an IPL Hair Removal Device
When using an IPL hair removal device, it’s easy to make some common mistakes, especially if you’re new to the process. Here’s what to watch out for:
- Skipping Pre-Treatment Shaving: IPL is most effective when the hair follicle is still present but the hair above the skin’s surface is removed. Never skip this step.
- Using Tanned Skin: It is advisable not to use IPL on tanned skin whether natural or through the use of self-tanning products, since this may cause burns and patchy results.
- Inconsistent Treatments: IPL needs to be done in several sessions for the best outcome. It is important not to miss sessions or be irregular because this will slow down your progress.
- Using High Energy Levels on Sensitive Areas: Reduce the energy level when working on sensitive areas such as the face or the bikini area to minimize discomfort and skin rash.
By following these precautions, you’ll achieve the best possible results with your IPL treatments.
How Long Does IPL Hair Removal Take to Show Results?
It is important to remember that IPL hair removal requires a lot of patience. The number of sessions required will vary depending on the hair type, skin color, and the area that is being treated. Usually, the hair loss is visible after 4-6 sessions with an interval of 2-4 weeks between the sessions.
However, it is crucial to understand that body hair is not all in the same phase of growth and development, and therefore not all of them will be affected by the treatment at once. To address other phases of growth, you will need to undergo treatments repeatedly. It takes 3-6 months for most people to see the results when they use the cream regularly, and the effects are longer than those of shaving or waxing.
Konmison IPL: Superior Hair Removal and Skin Care
For a professional hair removal device, our Konmison IPL Hair Removal Machine is one of the best. This device employs the latest IPL technology with the wavelength of 650-1200nm to selectively damage hair follicles located in the dermis layer of the skin. It is a process that is almost painless and yet it yields results that are long-lasting. With 300,000 valid shots, a large 7. 5cm² treatment spot size for faster hair removal, and skin-cooling technology for added comfort, it is safe and effective. This versatile machine also offers several treatments including skin rejuvenation, pigmentation, and acne treatment, making it a versatile tool for home and professional use.
At Konmison, we are a leading beauty and wellness company that offers premium and technologically advanced devices for everyday use. All our products are developed with the aim of achieving the best performance while at the same time being convenient to use. Besides hair removal, our devices meet other cosmetic requirements such as tattoo removal and skin tightening. Our emphasis is on the affordability of products and services to enable users to realize their investment faster for both individual and business purposes. At Konmison, we offer you dependable and efficient machines that will give you the desired results that are long-lasting and noticeable.